This Career Episode is an example of work – based Career Episode. The author of this Career Episode is a Project Engineer at a company named Wipro Limited. It is the project called “LTE Certification Testing”.   For Introduction Section, he has created a table mentioning the location of where the event happened, company’s name, his designation, and project name as follow:   Time duration 6 months Location Bangalore, India Organization Wipro Limited Project LTE Certification Testing Position Sr. Project Engineer In Background Section, he provides a simple introduction to the Company Profile and what the project was about. The Project was about testing Data Throughput, Protocol Conformance, Radio Frequency (RF), Radio Resource Management, A-GNSS Receiver Testing, Over-The-Air (OAT) Antenna Performance, Field Interoperability Testing (FIT) and Carrier Aggregation using devices like smartphones and tablets, wireless cellular routers and data dongles. The main Objective of the project as stated by the author was:   • To download and install mobile equipment firmware using flashing tools • To perform static and drive testing • To verify and validate the fixed issues at simulator level as well as a radio interface level • To submit a detailed report of the project   Moreover, in Personal Engineering Activity, he discusses his roles and responsibilities as a Project engineer which are: • Carry out simulated scenarios using CMW500 • Carry out mobility or filed testing   He explains about various tools and techniques he used to perform these projects. In the first Paragraph, he provides an overall description of how the testing will be conducted. In the Second paragraph, he illustrates the testing conducted using CMW500 tester. Similarly, in the third paragraph, he discusses the testing done using eNodeB. The next paragraph is about mobile device field Testing. In the coming Paragraphs, he describes more about the testing technique that he used to complete this project.   Finally, he concludes the whole Career Episode by summarizing all the techniques explained in the previous section that is used for completion of the project in about 13

The author of this Career episode Report is an Agricultural Engineer. This Career Episode describes roles and responsibilities held during the work on his University Engineering Projects. This is an example of Academic Career Episode.   In the first Section, he presents the name of the project i.e. “Development and Evaluation of a Manually Operated Groundnut Roaster”. He did this project when he was still a student at Obafemi Awolowo University (OAU) in Nigeria in 2008. He did this project under the supervision of his Professor.   Further, in the Background Section, he provides a brief description of the production of groundnuts in Nigeria and how it has affected the economy of people for years. Also, he provides the reason for why he choose this project. There was two objective of the project as explained by the author:   To design and evaluate a 20kg capacity groundnut roaster which uses charcoal as an energy source. To carry out an ergonomic study using a female subject on the developed machine. He also listed his roles and responsibilities as: • Initial Study of statistic of Groundnut production in Nigeria • Prepare necessary apparatus • Design Groundnut Roaster • Evaluate the machine with various apparatus • Determine the roasting capacity and efficiency of the roaster • Prepare Cost analysis report   To demonstrate his engineering knowledge and skills, he explains the engineering techniques he used to complete the project in Personal engineering Activity Section. Here, he wrote a separate paragraph for separate activities like preliminary study, designing, assembling, calculations, testing and analysis as below:   CE 1.7: About Roasting Process CE 1.8: Design of Roaster CE 1.9: Working of Machine. CE 1.10: Testing of Roaster Machine using Apparatus CE 1.11: Analysis of Roasting Operation CE 1.12: Cost Analysis CE 1.13: Problem faced and it’s Solution CE 1.14: Future Scope of the machine CE 1.15: Brief Description of the guidance from his professor In Summary Statement, he outlines all the activities he did to complete this project. It summarizes all his studies, designing, implementing, testing and analyzing processes involved in the successful completion

The author of this Career Episode is an Industrial Engineer. This Career Episode describes roles and responsibilities held by the writer during the training period of his Engineering Career. This is an example of Training or Internship Career Episode.   In the Introduction part he discusses the time and aspect when the project happened and the duration it took to complete it. The author is an Industrial Engineer who illustrates the project he was involved in as a trainee at a Company named Unilever Nepal. The Project name is “Calculation of warehouse capacity of Unilever Nepal for 15 days production”.   In next section i.e. Background he provides a brief introduction to the Company and continues by listing objective of this project. His objective for this project was   • To determine the storage capacity of warehouse • To prepare a plan for maximum space utilization for future • To calculate total space occupied by pallets in the Warehouse   In Personal Engineering Activity section he describes the engineering skills he applied in order to complete this project. He explains in detail about following engineering knowledge he used in this project:   • Understanding of the mechanism and process of the Production plant. • The concept of Product, planning, and control to regulate and monitor production process. • Logical and Mathematical Knowledge to calculate various parameters associated with production rate. • Analytical Skill to analyze calculated data and get a result to optimize the warehouse space. He also discusses the Problems he faced and how he handled it using his engineering knowledge. Some of the Problems and Solution that he handled during this project are:   • He found a problem with roof ridge or jack roof in the warehouse of the industry which resulted in unbalanced temperature in the warehouse. To solve this problem he suggested the company to use HVAC system. • He also found problem-related to Hydraulic Lift which could cause a serious problem. So he suggested using a convex mirror to avoid any accident related to hydraulic Lifts.   Finally, he summarizes all the three section in the Summary Statement Section. Here, he explains in brief about all the factors that are described in the previous section and provide a short summary of the whole Career Episode.

The candidate for Engineering Associate ought to focus on specific elements of the systems and timely work within the codes and apply established practices and procedures.   There was always an attraction of mine towards the technical knowledge. This had led me to pursue an engineering education and establish my career in the field of engineering. The major activities that had helped me to acquire this objective were as follows;   • After the completion of my higher secondary school education, I decided to pursue my career in an engineering field. My interest was in electrical and electronic systems. So, I joined Advanced Diploma in Electrical and Electronic Engineering in __date__. This was ___ years of course, and I completed this course in ___. • While pursuing my diploma course, in order to realize the theoretical knowledge that I had gained, I participated in different projects. Some of those were a group project, while some were an individual project. Nevertheless, those projects really helped me to gain further knowledge as well as develop my skills in the electrical and electronics engineering. Some of the main projects that I was part of were; Design and Fabrication of Sound Mixer, Design of an APRS Transmitting System, and Synthesis of Low Cost Solar Powered LED Light. • In order to be a proficient engineer, who is well equipped with good skills of pertinent software tools, I took different training courses and also did a self-practice of different software. As a result, I am a fluent user of software like MS Office software (which includes Word, Access, Excel, PowerPoint, Visio, etc.), AutoCAD, ________________, etc. • In a different time of my career, I also worked in the McDonald in both India (one-year part-time job) and Australia (two years). I had handled several responsibilities while working in the McDonald. I was a crew trainer for the South Melbourne’s McDonald’s Besides, I also held the responsibilities of stock handling, floor maintenance, equipment operations, etc.

Continuing Professional Development (CPD) is the way to show how you will and are keeping yourself updated about new inventions and discoveries in the engineering field. All relevant CPD Australia must be included in your CPD application.   I completed my Bachelor of Science in Industrial Engineering from XXX University in 2000. I am a professional Industrial Engineer with more than 13 years of progressive experience in Planning and Project Control of various EPC projects as the consultant and client. I also have work experience in many live projects which has successfully been deployed. To increase my skills, I also have attended workshops on PMBOK 2015, Presentation and teaching, Public Speaking, Adobe Photoshop, Primavera 3.1 & 6, and Microsoft Project. Apart from these, I am a team player and provide a positive ambience for my team members.     With all the academic qualification and 13 years of work experience in the field of Planning and project Control, I am applying for the Engineering Manager (Engineers Australia).

The candidate for Engineering Technologist should be adept at using their knowledge base to solve specific and complex engineering tasks. S/he should be a professional on engineering networks and their interactions, with the capability to identify and solve complex problems.   I did my Bachelor’s degree in Maritime Technology from October 2010-July 2014 at the XXX (University name) in XXX (University location) where I got to study about the basic engineering, measuring and plant engineering, maritime energy systems, oceanology, maritime materials, water treatments, automation system and wind energy. After the completion of my 4 year Bachelor’s degree program, I immediately joined Master’s degree. I did my master’s degree in Environmental Engineering from XXX (University name and location) from September 2014-December 2015 where I learned about Recycling and waste management, process control, colloid and interfacial chemistry, environmental biotechnology and water treatment.   During my undergraduate course, I did a project on “Determination of the influence of salt water and lunar regolith at positioning tolerances on the inductive energy transfer”. This project mainly intends to analyze the probability of using induction of power by using the coils to transfer the power in the extreme environmental conditions. I dealt with the deep sea surface of the moon, which is the main area where the research is being carried out where majority areas are unknown and many researchers and scientists are working on it. Similarly, in the Master’s degree program, I carried out a project titled “Design, Dimensioning and Cost-effectiveness Testing of Mechanical Process for the Separation of Algae from Tank Water on a Technical Scale”. This project was done with the collaboration of XXX (company name) to separate the solid components as well as reduce the bacteria by low-pressure ultrafiltration process.   Then, I did my internship as an intern in XXX (company name and location) where I worked in the ROBEX project from October 2013 – January 2014. From January 2014 – December 2014, I worked in XXX (company name and location) as a Student Assistant. My key responsibilities was experimental design, procedure and evaluation of inductive energy transfer test and ROBEX community workshops. After that, I joined in XXX (company name and location) as a Student Assistant from January 2015 – September 2015. My key responsibilities was QHSE tasks, creating fire protection regulations, active cooperation in the protection and safety concept for an Offshore wind farm etc. Lastly, I worked in XXX (college name and location) as a Boarding House Tutor from June 2016 to till date.   Besides study and work experience, I am fluent in English communication with an IELTS score of 7. I’m also thorough in design software like CATIA and programming language C. I was also engaged socially in the following:   • Caretaker at Volunteer Fire Departments for XXX from April 2010- October 2013 • Trainer at DLRG –XXX Association from April 2010- October 2013 With the knowledge from various engineering course and environmental factors, academic and industrial projects, internships and work experience in different places, I want to establish my career as a Professional Engineer via Engineer’s Australia.